|
Find frequently asked questions, tips & tricks, and how to's. If you still require assistance, do not hesitate to ring Aaron's PT Support, where technicians are ready to help! 1 (855) 202-3949
Reset for Whirlpool Cabrio Washing Machines
| Author: Chris Turner Reference Number: AA-00425 Views: 25163 Created: 2017-01-20 16:26 Last Updated: 2017-01-20 16:26 |
0 Rating/ Voters
|
 |
If
you need to reset a Whirlpool Cabrio washing machine, you can try the
following:
- Turn the washer off.
- Set the mode selector dial to NORMAL.
- Turn the dial counter clockwise ONE click
(LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then
clockwise ONE click (RIGHT).
- Now press the start button.
- All the cycle indicating lights should be
illuminated.
- Press the Start/Stop button once.
- Rotate the dial until Rinse, Wash, and
Stop lights illuminate.
- Turn the washer off and unplug it for 10
seconds.
- Finally, turn on the washer and it should
now be reset.
- Run a test load empty to be sure the reset
worked. If not perform the reset procedure one more time.
If
that did not work, try the next Cabrio reset procedure:
- Touch any button on the display pad to
clear the error code or press “Pause/ Cancel.”
- Choose another cycle and press “Start”.
- Disconnect the Cabrio from power if the
error or problem comes back.
- Wait 5 minutes before restoring power.
- Choose a new cycle and press “Start.”
- Run a test load empty to be sure the reset
worked. If not perform the reset procedure one more time.
Comments 8
|
Ask a Question 
Won't run jest clicks no code